Roofing Equipment & Boilers Surfacing Plant Tools & Equipment Bitumen Boilers Safety Accessories Spare Parts Accessories & Gas Torches Thermometers LPG, 'Impact' & 'Petal' Industrial Gas burners Thermostat & Boiler Control Jointing & Marking shoes & tools Low Temperature/Polymer/Rubber Materials Agricultural & Marine Cookers

Farvis - Engineering since 1840

“Quality at Trade Prices”

All Farvis Products are design copyrighted


IF THE BOILER HAS A TAP IT WILL HAVE LONGER LEGS UNLESS IT IS A 'SPECIAL' In general, short leg boilers don't have a tap fitted.  We MUST know about the tap when you order

Look at the pictures below - we need the height of the casing, not how high the boiler is off the ground.  Measure the height of the green bit - NOT the pan as well !!

Measure to the top of the case as in the photos - NOT to the top of the pan ring.

Here the height of the casing is 22 inches.

Now measure the  diameter of the casing to the outside of the top ring.