FARVIS MOBILE BOILERS

                          ROAD TRAILER                                                                    SITE TROLLEY

FARVIS 25 gallon thermostat control road trailer boiler - short chassis with safety tap ( design copyright) .

home

All FARVIS products are design copyright

FARVIS manufacture a range of mobile boilers for various tasks.   We offer the standard range shown below and any of our boilers can be built as a 'special' and fitted with options and accessories listed elsewhere. 

WE HAVE TAKEN GREAT CARE OVER THE SAFETY AND STRENGTH OF OUR DESIGNS.  THEY ARE PROFESSIONALLY BUILT,   HEAVY DUTY UNITS, DESIGNED SPECIFICALLY FOR THE TASK OF CARRYING A BOILER AND CYLINDERS. 

Trolley boiler

    A Farvis boiler mounted on a four wheeled chassis type trolley with shielded safety gas cylinder carrier, burner and outlet tap, drag handle and tow eye.  For general pedestrian use the standard  trolley boiler is an excellent choice and can be fitted with a range of options including parking brakes, larger wheels for rough surfaces and longer distance towing, together with various boiler types and accessories.  The trolley is made from galvanised 3mm steel to provide durability and an extremely strong chassis.  The boiler is bolted on for easy replacement and drain holes are provided to prevent a build up of spilled material on the heat shield.  The heavy duty rubber tyred steel centre wheels are protected from bitumen splashes and a combined drag handle and tow eye are fitted to allow easy movement, although towing is only suitable at walking speeds.  This is the culmination of years of experience and is a really tough, functional and hard working unit.

25 GALLON FARVIS TROLLEY BOILER. 

Our trolley units are galvanised for long term durability and protection.  

ALL OUR TROLLEY BOILERS INCLUDE A SAFETY TAP & BURNER

Solid rubber tyres with steel centres and roller bearings, protected from heat and splashes,  lifting points and a well thought out design ensure that this unit is a favourite for anyone involved in site work who needs an easy to use, safe and reliable mobile boiler. These are generally a standard  stock item for rapid delivery. Hand pull or low speed site tow. ( Not for road towing) FITTED WITH OUR SAFETY BITUMEN TAP AS STANDARD

Road going trailer boiler

Available as a long or short chassis version, these trailer boilers are built to last. The boiler is easily detachable for replacement or separate use.   The trailer can accept any FARVIS boiler up to 50 gallons.  It is built to our own unique specification - the bodywork, deck and even the mudguards are made from no-nonsense 3mm steel plate.  This trailer is designed to last and is of military quality to provide long and reliable service. It includes a commercial beam axle and heavy duty tyres and ring hitch.  All components are sourced in the UK for easy spares. Trailer gross weight 700 kgs.  A FARVIS trailer boiler is a piece of construction plant - it is NOT a converted boat trailer!

Front section showing gas cylinder compartment, extinguisher holder and boiler shielding. Gross trailer weight is 700 kgs.   We include light board, brakes, handbrake and rear support legs in the specification. All bodywork is built from 1/8" ( 3mm ) steel plate for safety and strength.

          Short chassis trailer with guard rail, bucket stand and boiler with safety tap & lid lock.

Long chassis version with working platform. 

We offer two versions, one with a short rear deck, bucket stand and safety rail, and  a longer deck version incorporating a full width working platform.  Both are made for site operation with great attention to detail. We supply a complete unit which includes  fully shielded gas cylinder mountings with a quick release door,  light board, screw down adjustable jockey wheel,  rear props, ring or 50mm hitch and an easy to replace bolt on insulated boiler with safety bitumen tap, burner, hose and regulator and boiler lid securing device.  2004 models have an enclosed gas cylinder mounting for 2 x 19 kgs cylinders. All body fittings are designed for commercial vehicle use to make these trailers reliable and able to give years of service.  FITTED WITH OUR SAFETY BITUMEN TAP AS STANDARD.

All our equipment is built to last!    Illustration shows braked hitch and jockey wheel.

More details of a 25 gallon thermostat road trailer.

Mounting for fire extinguisher ( extinguisher not supplied ! )

..... and we also build 'specials'..... !!!!!

WARNING - All FARVIS products and features are design copyright

home

Design and specification may change without notice.